Now its hurry up and wait. If I dont hear back I am leaving negative feedback and returning my unit.

I have this issue with my Scout 10 11.6 head unit, but that was from the JUMP!! Just will not work!! 2016 Kia Forte

I have the same head unit but the DYX006 wiring harness (no canbus) and my speakers will not work for very long. After installation it worked on acc and on (was not tuned, but I could hear the tone...

Volevo sapere come posso connettere un dispositivo OBD2 usufruendo dell'appplicazione torque direttamente sul dasaita px6 max 10 .. Ho provato di tutto ma non si connette 

conforme junto envio fotos da canbus a 1 foto diz é a que esta instalada mas tenho a segunda tambem |

grazie

@bob jean this is for all dasaita products?

@Jaime Sánchez the issue does not occur to all RF210 chipsets...in my case I have a RF210 setup and always had my bt connected even having DElay OFF. On my wife's headunit...i had to remove...

@Carlos Fernandes and what canbus box do you have installed? Would you mind to post a picture of your canbus box?  

@Jaime Sánchez wow, this is crazy...

@Iker Gomez  Purchased from Aliexpress seller MTKNAVI Serial number D494E00096DA945C Build number: RK3399-userdebug 10 QQ2A.200305.004.01 eng HCT2 20210311

@Iker Gómez não existe canbus especifica para o carro, selecionei todas as opções disponiveis para Toyota e não funciona.

@Quick Yuan  Good evening, I am from Panama and I purchased a Dasaita brand stereo from DASAITA over the INTERNET. I want to update the firmware of the MCU and the system, the data that I mai...

@Willian Ortega most recent updates include new versions of ZLINK in which Android Auto or Carplay have dedicated icon to be launched....in my case (S10plus) worked like a charm  

Usually MCU updates are related to new canbus models introduction.....in the case of MTCH, it seems new MCU chip is involved and tha's why MCTE updates are not compatible with MTCH and viceverse.

@Carlos Fernandes go to Android Settings | Car Settings | Factory settings: Password = 126 the go to the Tab "Canbus" and check which canbus is selected.  

@Stefano Introini  Vivid and Scout versions of the Firmware, just includes their latest version of the launcher into the latest HCT ROM. HCT is the first ROM version and Telenav (VIVID/Scout...

Hi all, I have camry dasaita scout 9" and am tired of the gps warning me of high accident zone ahead.  Not too bad in rural areas but in urban areas it can get annoying especially during phone...

@Steven Silva that method is the one I suggested....just when booting the unit (from fuse removal) and it does not shown the android 10 logo (black screen) immediately press the reset and keep it f...

@Michael you must ensure you are connected to Bluetooth first....if not check this: 1) remove all paired phones and keep only your iphone paired. If needed remove pairing an re-pair but ensure onl...