@Chillmiester Gabriel according to Jeep specs if 6 speakers and 5inch touch screen then no amplifier....but if uconnect 8.4 and 9 speakers it has amplifier.....so in your case you must activate the...
@Chillmiester Gabriel according to Jeep specs if 6 speakers and 5inch touch screen then no amplifier....but if uconnect 8.4 and 9 speakers it has amplifier.....so in your case you must activate the...
@Iker Gomez WQ_RF210
I don't believe so. It came with a Uconnect 8.4 and it does have surround sound. It's a 2016 Jeep Cherokee North which I believe is the same as a Trailhawk.
@tone T No idea about that. Why don't you have the Canbus? My unit came with it.
Tried option 1,2 and 3 with no luck until now. Now awaiting USB-A to USB-A cable for option 4 :-)
I found this this thread with lots of stuff to try: https://www.dasaita.com/community/forum/topic/62118/image-update-android-10-to-android-11?
Thanks alot @Iker Gomez . Your info is so great ❤️ One more question. I have not been able to find the "FULL Android 10 image" mentioned at 2). Do you have a link? Unfortunatly i'm going on ...
@Lester Gerhart Jr older versions of PX6 could have an incompatible hardware for A10 or A11 versions.... which bluetooth chipset do you have configured on the factury settings?
It seems to be a IR receiver. I didnt know that any dasaita product has a remote control... is there any plug onto the unit that corresponds to that cable?
@Uhrskov Thomas you can try...my experience with the Dasaita PX6 units is that the bootable SDcard method does not work anymore....(that file PX6_A10_IGV.img file was created by me -my initials)......
@Chillmiester Gabriel are you sure you dont have any amp on your Jeep? Which model and version of Jeepo is yours?
@Alfonso R que chipset blueooth tienes configurado en factory settings?
Hola Mi telefono nunca se conecta al equipo por bluetooth al menos que reinicie el Dasaita. Cada vez que conecto el Dasaita tengo que reiniciarlo para que vuelva a conectar con el telefono, rara ...
Thanks @Iker Gomez. After step 5 description I would have tried a Android 10 OTA update, but the unit went black screen :-( I asume my problem now is that the boot system has been corrupt. I...
Ich habe es hier gekauft dasaita Official Store und seid anfang an nur Probleme . Nach dem Update was ich machen sollte geht nichts mehr . wie kann ich garantie in anspruch nehmen .
I have Dasaita Android 11, Vivid11 firmware. It came loaded with "without amp" setting in the Canbus. My Jeep Cherokee has no amp. I'm getting no volume. This is on radio, music apps, YouTube, ect....
@Tony Ye Wow, thank you so much! That fixed it! Also, do you know If I need to have a canbus selected in the extra car settings? I have a unit for the 6th gen legacy, but I have no canbus selected,...
@Jose Oliveras it seeems a bad connection between the coreboard.... Open your unit and check if all cables and coreboard is well connected,,,,
@Uhrskov Thomas your problem is that all the updates that are you trying (according to your description ) are for Android 11. and you have Android 10 (Vivid 10) so....go again to the recovery menu ...
@Brandon Shiers In my case (MazdaCX5). Pin1 and 11 are used by two white wires that go to the Canbus Box