I have Apps crashing on my MAX10PX6 because of Android Webview App. As long as I do not update Android Webview App, Waze, Chrome, and other apps do not crash. I read on the forums that this can be fixed by updating the firmware. After reviewing the youtube channel and reading many of the forums, I think I need the latest MCU and firmware. What is the latest MCU(version number) and firmware update (date or version number)? Could you please provide the correct link for my unit for both of these? What is the correct procedure so I do not brick the unit? Thanks
@S C mcu upgrade and rom.update are different things.
You need a rom.update. go to the firmware section of this forum and select the latest android 10 version for px6 (you can select either max or vivid versions - just different appearance)
@Iker Gomez Thanks for the reply. The first step of the How to Update Firmware post says "Download the firmware and MCU (on computer), and copy them to the empty USB disk" So where do I get the correct MCU to put on the USB disk (in FAT32)?
@S C Dont update the MCU if are not experiencing hardware issues.
Software issues are related to ROM build updates, which is your case.
MCU updates just include support for new canbus boxes/car models.
If you still want to update your MCU, Dasaita removed the MCU updates from the forum...in order they could control who and why a MCU upgrade is necessary.
According to the instructions provided, there is only one zip, but inside the zip there is no hmcu.img file. Should I update only with the zip file inside the USB device without hmcu.img file?
@Wyatt Earp There is no need to update MCU, we would like to tell you that updating the MCU is only when some issues are detected on the hardware behavior of the unit.
MCU upgrades do not add new features to the unit. Usually just include support for new Canbus boxes (new supported car models)
@Wyatt Earp We would like to tell you that they have different OS that it could not be switched. If you have MAX 10, you could just update to Vivid10 or Scout10. Your understanding will be appreciated.
I am having the same issue of apps crashing on my PX6 because of the Android Webview App. I want to verify which Firmware to download before trying to update my system.
Also I haven't seen my MCU anywhere else online, specifically the _AW part of the MTCE. Not sure if that matters.
Tips: Step1. Please download above update file via your computer/laptop firstly. Step2. Please format the USB drive to FAT32 Format. Step3. Please copy the file “update.zip” to the root directory of USB drive. Step4. Please insert USB drive into the unit via USB cable. Step5. Please go Settings > System > System updates to start the update. Tap "wipe data and format flash" and "install". (Please note that all data on this unit needs to be wiped before doing this step, so back up important data if necessary.)
Tips: Step1. Please download above update file via your computer/laptop firstly, then use the WinZip application to unzip the file. Step2. Please format the USB drive to FAT32 Format. Step3. Please copy the file “update.zip” to the root directory of USB drive. Step4. Please insert USB drive into the unit via USB cable, and press and hold RST button via pin to enter the factory reset page. Step5. Please tap "Wipe data/factory reset" and "Apply update from SD card or USB" to start update.
I was having same apps crashing issue, caused by Android Webview app. I tryed to update as advised above. Having same "error illegal system" and also"Version Unmatch..." on screen.