I have the dasaita vivid 11 for a 2017 toyota tundra.
the camera switches when I put the car in reverse but I see a yellow triangle with an exclamation mark.
does this mean something is broken? I can't change anything else about it?
thanks! The Dasaita is new, the cables are well placed
@sebas konijn It seems that the camera cable is not well placed, please kindly let us know your model so that we could send you the connection instruction to you directly.
I have a Toyota Camry SE ; I have 2 issues ;
1. Same as above the reverse Camera does not work; same I see a yellow triangle with an exclamation mark.
2. The Phone call button on the steering wheel does not work; It tells me no Network
@Armando Ortiz We have emailed you about the solution.
1. Check if the factory camera has been enabled.
2. Verify if the canbus option is 8.
3. Check if the connections of the camera cable is correct or not.
4. Check if the cables are in good condition or not.
5. If no luck, please send us some photos to show us the connection of the wires.
@Support Dasaita
model: Dasaita 10'' radio upgrade for 2014-2021 toyota tundra wireless
@sebas konijn Please let us know if your rear camera is after market or OEM. Meanwhile, please let us know if your cable is CB047 or CB004.
@Support Dasaita the camera is OEM and the cable is: CB004
@sebas konijn Hi there, we assume your wirings is incorrect. Here is the instruction.
Please make sure that if your car is compatible with NO.4, you need to connect the right camera plug with cam vin. Meanwhile, make sure the pinout of all the plug is in good condition and not bent.
@Support Dasaita Thanks! The camera is working perfect!
Postovani, molim za pomoc! kupio sam Dasaitu Vivid 11 HA5226+cb011 od Forgenta i ne mogu da dobijem pomoc da bih zavrsio instalaciju . U pitanju je montiranje rikverc kamere sa trzista (Forgent) . Spojio sam video kabal 6m sa kablom za napajanje kamere, drugi kraj video kabla sam spojio sa AUX V IN, ali mali crveni kabal ne znam sa kojim kablom da spojim. Sa narandzastim kablom na kojem je oznaka BACK ili sa PINK kablom koji ide iz Porta za napajanje. Na etiketi na radiju pise da je Reverse kabal broj 2 narandzasti sa oznakom BACK ali u njemu nema napona.
Gde da ukljucim zadnju kameru u Fabrickim podesavanjima ili u aplikaciji kamere.
@Bozo Gilic Please kindly refer to the video of how to wire the after market camera.
https://www.youtube.com/watch?v=CnkfOYrUrqw
You could also refer to our wiring instruction, too.
@Bozo Gilic It seems that your wirings is incorrect, have you followed the instruction that we sent above. If no luck, please kindly send us a few photos of the wiring on the back side so that we could diagnose and further assist you in solving the problem.
I have g13 for Toyota tundra 2014. Reverse camera not working. I have switched the yellow rca cables and still does not work
I figured it out. It works now
@Max Fernandez Hey max i have the same year tundra and my backup camera is not working, what did you do to fix yours?
Thanks!
@Trevor Yates Hi Trevor,
1.Factory settings password: 126
2.SWC/Factory Camera / Amplifier : Go to Factory setting > Canbus > Choose NO. 8.
3.Factory Backup Camera : Factory setting > Others > Reverse Detection Set “Enable”.
If you try but no luck,please kindly get back to us.
I have the G13 for 2014 Corolla. I have the camera plugged in to No. 4, but the camera is not working. I get the yellow tangle. How do you switch the 4 with the 4-1 plug?
I figured it out. I had to plug in the cables with all the amplifier settings.
