@Stas86 Stas86
Hello.
Thanks for your response.
Please check the update tutorial below then give it a shot.
-----------------------------------------------------------
Update File:
System Firmware-Vivid10:
https://www.dropbox.com/scl/fi/j3owqje9ysc5wusffjcgq/update.zip?rlkey=a605uzq8grv288jvkgwopa4na&dl=0
Tips:
1.
Download above update file via your computer/laptop.
2.
Format USB drive to FAT32 Format.
3.
Copy the file “update.zip” to the root directory of USB drive.
4.
Insert USB drive into the unit via USB cable;
then it will pop up automatically a window of update.
Alternatively, please manually go "Settings > System > System updates" to start the update.
***NOTE:
Please make sure that you have ticked option "Wipe data and format flash!".
-----------------------------------------------------------
Thanks!
The link to the file does not work. Can you send a working link? Thank you.
Figured it out, everything works. Thanks.
???
@Stas86 Stas86
Hello.
For further confirmation, please tell us if you can update the firmware successfully.
I try to update, but the process is interrupted.
@Stas86 Stas86
Update File:
System Firmware-Vivid10:
https://www.dropbox.com/scl/fi/j3owqje9ysc5wusffjcgq/update.zip?rlkey=a605uzq8grv288jvkgwopa4na&dl=0
Please try to re-download the file, and copy it to other USB drive to test how it goes.
Please make sure that the file is “update.zip”(it doesn't need to unzip or rename),
and you have ticked option "Wipe data/factory reset" before you tap "Install".
Ok, thanks!
@Stas86 Stas86
You are welcome.
