Hello, I recently purchased the DASAITA HA5404H G13 QCM6125 for Peugeot 208 year 2017 and the SWC don't work.
I also have the old model PX6 Max 10 DASAITA for Peugeot 208 bought in 2019 and with this model, SWC works well.
I have made the same settings, canbus n°:61, but steering wheel control don't work with the new DASAITA G13.
Can you help me to solve this issue please ?
Thanks in advance
Below my version of head unit:
@Gael ZUCCATO Hi Gael,
May i know what's the specific car years?
Coul you please take a pic of showing the old radio PX6 and the new canbus box of NEW radio G13' canbus box to us?So that we could better confirm.
This is my canbus configuration:
@Gael ZUCCATO
Thank you so much for your info ,we have reflected this issue to the engineer,we will get back to you soon when we get response.
Thank you for your time and patience in this matter!
@Gael ZUCCATO Hi,
Did the px6 unit and G13 unit both install in same car :Peugeot 208 year 2017,right?
Did you only remove the canbus from the PX6 unit's harness and the G13 power cable to use on the G13 unit? Or you just use a set of PX6 harness with canbus on the G13 unit?
Hi,
Yes, it's the same car (Peugeot 208 year 2017).
I use the PX6 harness with PX6 canbus on PX6 unit,
I use the PX6 harness with PX6 canbus on G13 unit,
I use the G13 harness with G13 canbus on G13 unit,
I use the G13 harness with G13 canbus on PX6 unit,
I use the G13 harness with PX6 canbus on G13 unit,
I use the G13 harness with PX6 canbus on PX6 unit,
I use the PX6 harness with G13 canbus on PX6 unit,
I use the PX6 harness with G13 canbus on G13 unit,
And SWC works only with the PX6 unit...
In "Settings / Car / Factory settings / Other", in SWC menu, I test with "SWC key" and with "CAN key", and the 2 options works only with the PX6 unit.
I think there probably was a problem with software or MCU of my G13 unit.
Did you have any updates to test ?
Thanks in advance
@Gael ZUCCATO Sorry,do you mean use the G13 harness &G13 CANBUS also worked with the steel wheel control on PX6 head unit,right?
@Support Dasaita Yes exactly
Otherwise, could it work by connecting key 1 and key 2 of the G13 harness ?
Can you tell me how to connect these 2 cables please ?
I don't know which wires I should connect them to...
@Gael ZUCCATO
Thank you for your info,we have reflected this issue to the software department to look into this,we will get back to you soon when we get response.
Hi Gael,
Please update the specific MCU via the link below,here are some tips to help you get the work done:
https://www.dropbox.com/scl/fi/gcu4y850d8dyu4gxm2cfr/hmcu.img?rlkey=jm86jx7bapudgai30jan0jra8&dl=0
1.Download the document through the link via your computer/laptop.
*Do not rename and Unzip the file
2.Format the USB drive before copying the file to it, then insert the it to the USB cable.
Go to the Settings>System>MCU updates,to finished the updated.
*The upgrade process is forbidden to cut off the power during the period.
For any question about the updating,please kindly get back to us.
Thank you for your time and patience in advance!
@Support Dasaita Very perfect ! The SWC works fine now :)
The Steering Wheel Control worked perfectly right away after updating the MCU via the file you gave me.
A big thanks for your precious help for my problem.
@Support Dasaita
I have another small problem, maybe you can help me too...
I bought a dashcam DVR with my PX6 unit from you in 2019 or 2020 and it worked perfectly well.
Unfortunately, for about a year now, it has stopped worked, no more image...
My first question: Do you know why it stopped working ? (what are the probable causes)
My second question: If I can repair it, is it compatible with my G13 unit ?
My last question: Do you have a similar model that is compatible with my G13 unit ?
Thank you in advance for your help.
And thank you again for your indispensable help for my SWC issue.
Best regards
There are some photos of my Dasaita DVD dashcam and connections wires:
The blue cable isn't connected on one side or the other since the first time (never connected since I purchased the DVR Dashcam)
@Gael ZUCCATO
Hi Gael,
Thank you for your time and patience in the SWC issue.
This kind of DVR can't compatible with G13 unit.Here is the DVR for your reference:
https://www.dasaita.com/collections/front-view
Hello, my 208 (2018) also does not recognize the steering wheel key, can I use the update mentioned above?