@Celestino Siddi
You are welcome.
@Celestino Siddi
You are welcome.
Is there a way to set the region other than China resulting in correct time zone and time and date from GPS?
Another question! Can I change the rear camera settings? With the original system the vision has much improved
@Celestino Siddi
Hello.
Please try to do as follows:
Settings > System > Date&time > Time zone.
@Celestino Siddi
Hello.
For further confirmation, pleaes tell us what settings you wanna change,
and whether your current rear camera is the original one.
@Support Dasaita already tried it can't be changed
@Support Dasaita The camera is the standard one, I would like to try to modify the sharpness, contrast, etc., etc.
@Celestino Siddi
Regret to tell you about it doesn't support to change the related settings.
@Celestino Siddi
Please go Settings > About Machine > Model; Android Version; Build Number; MCU version,
then send its photo(see pic) to us.
@Support Dasaita
@Support Dasaita
@Celestino Siddi
Please try to update the firmware to see how it goes.
-------------------------------
Update File:
Vivid 11 Version Make Sure your unit is PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20240416)
https://www.dropbox.com/scl/fi/q6xth470whr5sz5vfrn0k/update.zip?rlkey=7fzg210e29xm2ghwu3cexxr5z&dl=0
Tips:
Step1.
Please download above update file via your computer/laptop firstly.
Step2.
Please format the USB drive to FAT32 Format.
Step3.
Please copy the file “update.zip” to the root directory of USB drive.
Step4.
Please insert USB drive into the unit via USB cable.
Step5.
Please go Settings > System > System updates to start the update.
Tap "wipe data and format flash" and "install".
(Please note that all data on this unit needs to be wiped before doing this step, so back up important data if necessary.)
Reference Operation Video:
https://www.youtube.com/watch?v=xoRDPOxqFXY
(Please disregard the MCU update shown in the video cuz you only need to update the firmware at this stage.)
-------------------------------
Before updating the system to try to solve the bug of the non-editable region, I would like to know if I will then have to configure the entire car tablet with my settings because if I have to redo all this, I prefer to leave it like this
what would be ALL the Canbus settings for Tundra 2020(no jbl system), factory amp under passenger's seat. It seems is #8 but there are more options (PRADO, etc). ty :)
@Support Dasaita I have a Nissan Quashqai J11 MY2019. My dasaita is G12 firmware is QCM6125_20240812. From last two firmware update CAM button dosn't work. I tried cunbus 10, Left rudder, 1 Type HI, AVM 1 and cunbus 37 ...don't works! any solution? Another problem before update is the car clock in 12:00.
@ALESSIO FRATTARUOLO Hi ALESSIO,
Please keep the settings same as before the camera can work properly.
And then please take a video of showing what's display on the screen when shift into reverse,so that we could better confirm.
Thank you for your time in this matter!
@ALESSIO FRATTARUOLO Do you mentioned that the time of the unit and the car clock are not synchronized?
@Support Dasaita Correct, car clock remain fixed at 12:00. Sometimes set the hour when I start the car but stay fixed.
@Support Dasaita
@ALESSIO FRATTARUOLO
Hi Alessio,
Is the issue of the 360 camera getting resolved?Was the firmware is QCM6125_20240812 now?
Regarding the issue of the clock display,please go :
Settings > car > factory setting (Password: 126) > CANBUS > choose the CANBUS option is 0 > restart > apply > exit. After rebooting the unit,please go back to the canbus setting to choose option 10,then apply and exit.
If you try but no luck,please kindly get back to us,thank you.