Please go to Settings-Car-Factory settings-Enter “126”-Car logo.
Note:If your version is with Dasaita animation logo, please kindly contact with us for another specific firmware as this one doesn’t not support changing animation logo.
Please go to Settings-Car-Factory settings-Enter “126”-Car logo.
Note:If your version is with Dasaita animation logo, please kindly contact with us for another specific firmware as this one doesn’t not support changing animation logo.
How do I replace Dasaita animation logo on startup
@Jedi Nogood
Here are some tips to help you get the work done:
Vivid 11 Version Make Sure your unit is PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20230708)
1.Please download the document though the link via your computer/laptop, then use the WinZip application to unzip it.
2.Please make sure to format the USB drive(FAT32 Format)/SD card before copying the update file to it.
3.Please ONLY put Update.zip file into the USB drive/SD card,and then insert the USB drive to the USB cable.
*Please note that all data on this unit needs to be wiped before updating the system, so back up important date if necessary.
Regarding to the logo animation, please download the Toyota Logo through the following link.
https://www.dropbox.com/scl/fi/g64qdth4vt97ssb0yrhg9/Toyota.bmp?rlkey=wx67gyr9c0xlb9elwvasxn3cx&dl=0
And you can refer the video tutorial of how to customize.
Video tutorial attached: https://www.dropbox.com/s/pr2q1xjhqjk6p60/custom%20logo.mp4?dl=0
Ordine: 781019165321
Vorrei sostituire il logo di animazione Dasaita con quello della animato de la nissan. ho letto che bisogna cambiare il firmware
@William Arturo Escalante Please kindly let us know if your original Car logo is Dasaita. Additionally, please confirm if you want to change the logo to Nissan.
================================
Si prega gentilmente di farci sapere se il logo originale dell'auto è Dasaita. Inoltre, conferma se desideri modificare il logo in Nissan.
Si il logo originale è Dasaita, è vi confermo che desidero modfificarlo con il Logo Nissan.
@William Arturo Escalante
Here are some tips to help you get the work done:
Vivid 11 Version Make Sure your unit is PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20230708)
1.Please download the document though the link via your computer/laptop, then use the WinZip application to unzip it.
2.Please make sure to format the USB drive(FAT32 Format)/SD card before copying the update file to it.
3.Please ONLY put Update.zip file into the USB drive/SD card,and then insert the USB drive to the USB cable.
*Please note that all data on this unit needs to be wiped before updating the system, so back up important date if necessary.
Regarding to the logo animation, please download the Toyota Logo through the following link.
https://www.dropbox.com/scl/fi/q890l08tdvaz6461zphys/Nissan.bmp?rlkey=oygwanfk962hphcrn8ijerdfk&dl=0
And you can refer the video tutorial of how to customize.
Video tutorial attached: https://www.dropbox.com/s/pr2q1xjhqjk6p60/custom%20logo.mp4?dl=0
======================================
Ecco alcuni suggerimenti per aiutarti a svolgere il lavoro:
Versione Vivid 11 Assicurati che la tua unità sia PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20230708)
1.Si prega di scaricare il documento tramite il collegamento tramite il computer/laptop, quindi utilizzare l'applicazione WinZip per decomprimerlo.
2.Assicurarsi di formattare l'unità USB (formato FAT32)/scheda SD prima di copiare il file di aggiornamento.
3. Inserire SOLO il file Update.zip nell'unità USB/scheda SD, quindi inserire l'unità USB nel cavo USB.
*Tieni presente che tutti i dati su questa unità devono essere cancellati prima di aggiornare il sistema, quindi esegui il backup della data importante se necessario. Per quanto riguarda l'animazione del logo, scaricare il logo Toyota tramite il seguente collegamento.
https://www.dropbox.com/scl/fi/q890l08tdvaz6461zphys/Nissan.bmp?rlkey=oygwanfk962hphcrn8ijerdfk&dl=0
E puoi fare riferimento al tutorial video su come personalizzare. Video tutorial allegato:
https://www.dropbox.com/s/pr2q1xjhqjk6p60/custom%20logo.mp4?dl=0
@William Arturo Escalante
Here are some tips to help you get the work done:
Vivid 11 Version Make Sure your unit is PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20230708)
1.Please download the document though the link via your computer/laptop, then use the WinZip application to unzip it.
2.Please make sure to format the USB drive(FAT32 Format)/SD card before copying the update file to it.
3.Please ONLY put Update.zip file into the USB drive/SD card,and then insert the USB drive to the USB cable.
*Please note that all data on this unit needs to be wiped before updating the system, so back up important date if necessary.
Regarding to the logo animation, please download the Toyota Logo through the following link.
https://www.dropbox.com/scl/fi/q890l08tdvaz6461zphys/Nissan.bmp?rlkey=oygwanfk962hphcrn8ijerdfk&dl=0
And you can refer the video tutorial of how to customize.
Video tutorial attached: https://www.dropbox.com/s/pr2q1xjhqjk6p60/custom%20logo.mp4?dl=0
======================================
Ecco alcuni suggerimenti per aiutarti a svolgere il lavoro:
Versione Vivid 11 Assicurati che la tua unità sia PX6 Andorid 11
telenav_vivid_rk3399_11.0_ota(20230708)
1.Si prega di scaricare il documento tramite il collegamento tramite il computer/laptop, quindi utilizzare l'applicazione WinZip per decomprimerlo.
2.Assicurarsi di formattare l'unità USB (formato FAT32)/scheda SD prima di copiare il file di aggiornamento.
3. Inserire SOLO il file Update.zip nell'unità USB/scheda SD, quindi inserire l'unità USB nel cavo USB.
*Tieni presente che tutti i dati su questa unità devono essere cancellati prima di aggiornare il sistema, quindi esegui il backup della data importante se necessario. Per quanto riguarda l'animazione del logo, scaricare il logo Toyota tramite il seguente collegamento.
https://www.dropbox.com/scl/fi/q890l08tdvaz6461zphys/Nissan.bmp?rlkey=oygwanfk962hphcrn8ijerdfk&dl=0
E puoi fare riferimento al tutorial video su come personalizzare. Video tutorial allegato:
https://www.dropbox.com/s/pr2q1xjhqjk6p60/custom%20logo.mp4?dl=0
Is there a newer version of this firmware (For example 20230728 or 20230801 etc) that allows logo to be changed? I have Vivid PX6 Android 11.
Thanks.
@Adil A Hi there, here is the 0728 firmware that you can change the animation logo. (Make sure your head unit is PX6 Android 11)
https://www.dropbox.com/scl/fi/h1lpmcly5exu3k7kry6qf/update.zip?rlkey=ehs221z0h18b80fkbh71ycic7&dl=0
After updating the firmware, please follow the steps above to change the logo.
dear @Support Dasaita
could you please also share the logo for Suzuki ?
thanks a lot!
@Andreas __
Hi there, here is the car logo.
https://www.dropbox.com/scl/fi/tw4xjdtbszbryhec932dd/SUZUKI.BMP?rlkey=280oqlct9g7ndcxezvs34lojq&dl=0
Is there a newer version of this firmware that allows logo to be changed? I have Vivid PX6 Android 11. I think my firmware is 0416 ota or a previous one. I attached the screnshot of my firmware. Thank you in advance.
Thanks.
@Ed Bold Hi, you could set the car logo on the 20240416 version.
Vivid 11 Version Make Sure your unit is PX6 Andorid 11(The left widget's map could be customized, suggest Google Map and Scout Map.)
telenav_vivid_rk3399_11.0_ota(20240416)
https://www.dropbox.com/scl/fi/q6xth470whr5sz5vfrn0k/update.zip?rlkey=7fzg210e29xm2ghwu3cexxr5z&dl=0
@Support Dasaita Hello Dasaita. Can you send me the instructions on how to change the boot animation? I jnstalled the latest Vivid rom abd I've tried copying a toyota logo on a flash drive and chainging it in the factory settings but its still not working.
@Ed Bold You could refer to the instruction below. If no luck, please shot a video to demonstrate your situation so that we could better diagnose.
https://www.dasaita.com/community/forum/topic/126388/how-to-change-the-boot-logo
@Support Dasaita
Please help. Trying to change boot up logo. As your website instructed I am sending you request for update "firmware" to allow for this. My software has the limitation u mentioned.
" If your version is with Dasaita animation logo, please kindly contact with us for another specific firmware as this one doesn’t not support changing animation logo. "
my purchase # is SP-DA5449 and my stereo is;
Android13 Car Stereo for Toyota Tundra 2014-2021 Wireless Carplay & Android Auto Car Radio | Qualcomm 665 | 10.2" QLED Screen | Wifi+4G LTE | 6G/8G+64G/256G | DTS|GPS Navigation Head Unit | Optical Output
Model - QCM6125
Android version - 4.14.190 #30 Jun 14th
Build # - QCM6125 13 S10A_123 Eng.hct.20240614.021346 NA
MCU version - MTCHS_ZST_V4.12d_1 May 22 2024
CPU - Quad-core Cortex-A73 @ 2.0G
Serial # - C804D2FE975B9786
HELP!!
@Mark Wallace
Hello.
About the customize boot logo steps, please refer to below instruction:
Step1. Insert USB drive with logo image into the unit via USB cable.
Step2. Go App "FileBrowser", copy the logo image to unit.
Step3. Go Settings > Car > Factory settings > Car Logo > Custom > Select logo > Apply > Exit > Reboot.
@Support Dasaita The first Dropbox link is no longer working
@Celestino Siddi
Hello.
For your information, the old firmware is unavailable.