@Rob Moore Here is the 2nd Image of my status

Hey I just wanted to update my Dasaita. Can you please tell me what files I will need to do it the correct way. Thank you in advance. 

Here you go!!   Thanks  

As far as I know, that menu is only for select when the unit will completely shut off after a period of time (autosleep= never shutoff unless a battery level decay is detected). This is the time in...

Hi, I tried that option too... the moment I press the engine button to turn engine off the head unit shutdown right away too... even if selected 1 hour

  I unzipped and found the original "update" file and went back to MAX. I hope a fix is made for this reoccurring issue! Will there be a MAX 10 update that will fix it in the future?

I meant Current Build is QCM6125_20240111-1739 and current MCU is 4.06.  NEED THE LINK TO DONWLOAD MCU 4.09.  Thank you again.

This is exactly what my question was where can I download MCU 4.09? information about the build is in the question as I already updated to new build mentioned in the subject but it didn't update th...

Not sure why a right hand drive would have a different canbus but the finisher should look opposite to what the left hand drive looks like.

Respiratory function is crucial for overall health and well-being, yet conditions like asthma and chronic obstructive pulmonary disease (COPD) can significantly impair lung function. Managing these...

What should be the canbus settings?

@Cory Frey Please update the firmware to the latest to check if the problem persist or not. telenav_vivid_rk3399_11.0_ota(20240302) https://www.dropbox.com/scl/fi/c8rkr7qqur4msu60fd4hx/update.zip...

@Cam Jones We are wondering if just the bluetooth call has static noise, is the Carplay call working in good condition or not?

@Jayden s Please let us know your order number so that we could locate your order detail and give you more appropriate instruction. In the meanwhile, please send us the current Build Number and MCU...

@Mike Justis We are wondering if you could not connect with Wifi or the signal is weak. Please further demonstrate your issue so that we could confirm.

@Mohammad Mirza Please send us your current Build Number in the meanwhile, you may need to update the firmware to the latest and the MCU to 4.09. Your prompt reply will be appreciated.

@Jennifer Verbois Have you correctly connect the antenna? In the meanwhile, please go to Settings >Factory Settings > Radio and make sure that you have selected the correct region. If no luck...

@Akion22 Do you mean that you could not change the station? We are wondering if you could shot a video to further demonstrate the issue that you mentioned. Meanwhile, please make sure that the Radi...