@B C Hi, some customer said that some cables of Honda Viechle would be hidden under the dash board. Please kindly check for it if possible.

@Stephen Hughes We are wondering if you want to switch back the vivid version without Scout. Here is the firmware for it. https://www.dropbox.com/scl/fi/h1lpmcly5exu3k7kry6qf/update.zip?rlkey=ehs2...

@Iker Gomez yes, I'm aware of that doesn't make sense, but schematics I found online and from other users with the same question states that this is the case for our trim's factory touch screen rad...

@Support Dasaita This is what the back of my factory stock radio looks like. There's no connector for the radio station, as it doesn't connect directly to the unit, as I recently found out with my ...

@B C if is in the trunk....how the stock radio could get radio signal? An specific cable should be there for antenna purposes

@Support Dasaita can you ask the developers to change that "prohibit reverse" by a simple "reverse camera"?  That text  is very confusing to figure out which feature are you playing with.

@B C Would you kindly show us the OEM radio connector of head unit, which we may help you?

@Support Dasaita Hello. Thank you for looking into the issue. How would my harness be defective if all other features (except the radio antenna, that's a factory stock issue) work as they should? W...

@Adam Rosenthal You mean that if you only use the zlink, the head unit could work normally. If you disable the zlink and go to use the Android, then return to zlink, it will no longer get connected...

@Support Dasaita Hello. I checked again and it seems my factory stock radio doesn't have that connection for the radio. It turns out that connection would be found somewhere in the trunk of my car ...

@Carlos Fernandes  1. Go to Settings > Car > Factory Settings > enter "126" > other > Prohibit Reverse > Set "Enable". 2. Check if the No.4 cable has been connected properl...

@B C We just found that you have CB077. Here is the listing for it. https://www.dasaita.com/products/dasaita-10-2-inch-android-8-0-car-stereo-for-mitsubishi-lancer-with-factory-rockford-system-200...

@B C  We are wondering if you have connected the radio ant, please refer to the photo below, you need to connect it with our head unit and the 5th connector to your OEM connector.

@B C Hi customer, if the Canbus option that you chose is already 76, the wires are intact without any defection and all the control settings could not be revise. We would like to tell that the cabl...

@ZAKI KADOURA We would like to tell you that we are optimizing this issue now, once the function is improved, we will release new firmware.

@ZAKI KADOURA We would like to tell you that you could customize some widgets, like to wallpaper, the display on the bottom or side. The Vivid 12 will be launche soon, after then, you could change ...

my head unit up dated to scout and thing not the same and when i press the maps on the main screen no scout maps come up but google.   it should not be allowed to update in the uk if there is ...

@Iker Gomez yeah, that's the conclusion I'm starting to see unfortunately. Thank you. 

@B C you have to enter into the factory settings (pass:126) and on the canbus tab you have to select the following: 76 Accord 2013 (BiNaRui) That is the protocol for your cambus box. If after se...

@Iker Gomez brilliant  ,working now