@Eminit  Hi， To accurately confirm the compatible model for your car,please provide a clear photo of the OEM Radio to us. To ensure the specific solution for your car stereo,please provide ...

@Support Dasaita in alto a sinistra al parabrezza, ma ripeto anche parlandoci vicino non sente nulla l'interlocutore.

@Gerardo Pellegrini Potrei sapere dove si trova il tuo microfono esterno?

@Manuel Bernet  20250217 work for your unit now right？

Last version for our Dasaita (2025 02 17) Itryed today and work, but I use too   https://xdaforums.com/t/appswitcher-v3-smart-swc-launcher-for-junsun-xtrons-ossuret-hizpo-and-similar-devices...

Would this version work with my DSP system? It was updated with a version provided by Dasaita support last summer to vivid 13 from vivid 12.

No puedo activar el zlink5 , ayuda por favor 

@Support Dasaita Thanks for getting back to me. The CB004 is one of the power cables that came with head unit. I have it already and it does not fit any of the plugs on my 4Runner. The CB004 suppor...

@Support Dasaita I wanted to add I have a different head unit than the one originally identified in this thread. Mine is as follows  Dasaita Android 13 Car Stereo for Toyota Tundra 2007-2013 ...

@Support Dasaita Yes only with Bluetooth. There is no way to connect the head unit with the factory screws. I just used the press in fittings. The static is only noticeable at low volumes. When you...

Hi, There is the later verison of Zlink 5.4.95 available.Can I update Zlink on my PX6 MAX 10 Android 10 to that version?

Thank you!!!!

@Support Dasaita buonasera, ho appena smontato il tutto: chiamata con microfono esterno inserito - l'interlocutore mi sente bene solo quando mi avvicino al microfono incorporato, lo stesso lo fa c...

I just installed the stereo in my car last weekend it was a newer version of the one we had that bricked during an update. Everything seems to work but it does not detect reverse. If i open the fro...

@Support Dasaita what is this?Full firmware update or ZLink?

@Michael Please go to your iPhone's Settings > System > Reset Option > Reset Wifi, Mobile & Bluetooth. And then reconnect your phone to see if the CarPlay could be connected or not.

@PAUL WELSHEIMER We have ceased publishing OTA firmware updates because the previous OTA releases led to many customers frequently installing updates that were prone to causing issues. Therefore, w...

@Fyan Myers Please kindly let us know if the static only occur when you play bluetooth music, have you connected the factory brackets on our head unit with the cars screws?

@Stephen Maher  We assume that the shut down delay settings could already meet your expectation, if you just want the head unit standyby or poweroff by 30 seconds, 1 minute, our engineer does...

@Dallan Schmidt Please let us know if you consider to order the CB004 cable and check if it will work or not. CB004: https://www.dasaita.com/products/dasaita-car-radio-installation-can-bus-adapte...