As stated above. No sound at door speakers.
was working, let it sit for a couple hours, started truck up and no sound.
I've reset the radio already, I've factory reset as well.
databus is set to option 8,
Pic is mcu and build number
I've tested for power at the speaker and there is no power at the speaker. If i disconnect and reconnect the amp connector for the speakers, i can hear an audible thump.
@Alexandre Silva
Hi Alexandre,
Please update the Firmware & MCU to the latest version via the link below,here are some tips to help you get it done:
①G13 Version：Make Sure your unit is QCM6125 Andorid 13
zst27_sc138_13_(20241121)
②4.15a MCU：https://www.dropbox.com/scl/fi/lup0rygoff52bfyy4u4vo/hmcu.img?rlkey=ljxdd49so7dr37qedomg3zdr9&dl=0
1.Download the documents ①&② through the link on your computer/laptop.
(Do not rename and Unzip the file)
2.Format the USB drive before copying the Update.zip & hmcu.img file to it, then insert it to the USB cable,and it will pop out the firmware updating tips on the screen.
(Tick the option"Wipe data and format flash")
MCU updated：Settings>System>MCU updates.
