Hello @Support Dasaita
I installed:
Scout 10 Version : Make Sure your unit is PX6 Andorid 10 Version
scout OS3.5.6
telenav_s4c_rk3399_10.0_ota(20230807)
https://www.dropbox.com/scl/fi/jqisdk0ll39g3g1e8axx2/update.zip?rlkey=t46o1b16tbw2an64t864vkh92&dl=0
I deleted the pairing on both phone and head unit and tried re-pairing. It would pair, but Zlink would not start AA at all, even after a long wait.
I noticed that there seemed to be a new feature to enable "sleep" for a quicker start.
So I tried a factory reset again. This time, I did not see any remains of the previous installation like I did before.
After initial setup, I tried re-pairing. It would pair, but Zlink would not start AA at all, even after a long wait.
So I turned it off and went for a drive. I found that while driving, the screen frooze completely. It NEVER did that before on any previous releases. Perhaps that is because I enabled that new "sleep" function?
After power cycling, it came back normally, but Zlink would not start AA even after a long wait like it used to. However, AA now starts instantly when connected via USB. It did not before.
So I did a reset of Network Settings on the phone and head unit. After repairing, Zlink would not bring up AA.
However, when I cleared storage on AA app, and reset network settings again on both the phone and head unit, after re-pairing, Zlink brought up AA immediately. Now it works immediately even after reboot! I believe my issue is now solved. I think my problem is I should have reset the network settings on the phone, head unit and cleared storage of AA all in sequence. I do not believe I did that before all at the same time.
Thank you for your patience in getting my issue resolved 😀