@Mcgyver83 We are wondering if the problem that you mention has been resolved or not. 

@Mike Van Eeckhoutte The only way to solve the issue is to adjust the panel. We are wondering if the issue bother you a lot, if NO, we doesn't suggest you to do that as it needs tools and may cause...

@Mike Van Eeckhoutte my guess that its a hardware alignment issue with the LCD panel and the glass w/ bezels

@Support Dasaita  This is looking straight at it   This is looking straight at the bottom, there's a littl gap from edge of the oblong shape to the bezel of the glass   &nbs...

@Support Dasaita let me check again, I thought I took the pic straight on, I know if I take a pic from down looking up it looks better, also your pics show a unit that has slimmer bezels  

@Mike Van Eeckhoutte Hi there, we are wondering if it's cuz of the angle that you shoot the photo which cause the partial screen. You can see the photo that we attached below which is shooted by di...

@Philippe Marsteau The settings is correct, is there any help with the booting rate?

@Mike Van Eeckhoutte Sorry that our engineer is still diagnosing the problem, please kindly wait with patience and once received their reply, we will provide you with further solution. 

@Support Dasaita any follow up to my pics?

@Support Dasaita I don't want the radio to cold boot every time I turn on the car. Right now I have it set to "standby". 

If you want to use another map other than the original one like WAZE, you can download it on the play store or install that apps via an APK package.

Please check if the WIFI antenna is properly connected. The WIFI antenna receives signals for both Bluetooth and WIFI, so please make sure it's securely plugged in. Please try ignoring the device ...

Please ensure that the GPS module is tightly fastened Please enter GPS apps and check the signal of GPS Make sure that the GPS module is placed on the A-pillar of your car *Please note ot...

1)Please check if there is some bending pin on the cable. And please check the if there is some bending pin in the CANBUS. 2)Please go to Settings > car > factory setting (Password: 126) &...

Make sure that your stereo model is with a cable CB064. Here is some feasible trouble-shootings for your reference: If car is without factory Bose system, please plugthe black cable"7"unplu...

Please note that you need to open both the WiFi and Bluetooth on your phone&the head unit to enable wireless CarPlay. In other words, the head unit could not be connected to hotspot when you&rs...

@Philippe Marsteau We are wondering if you can go to the path and make extra settings about the waking up of the stereo:  Settings > Car > Extra Settings > Shutdown Delay when ACC off

@Oswaldo Risson We are wondering if you can further demonstrate the issue of bluetooth, you can let us know if there is any indicator on the screen, or it's hard to connect your phone via bluetooth...

I Just upgrade my Px6 MAX0 to the latest Vivid 10 version and contstand bluetooth crashing.... The previouse version of Vivid 10 (Febuar23) was fine..... cant seem to roll back or find the old vers...

@Gary Fletcher-Moore I have the same problem I upgrade to the lastest  Vivid 10 version and constand bluetooh crashig.... please help