Obrigado está tudo ligado e não funciona
Obrigado está tudo ligado e não funciona
Hello is there any way how to use factory mic on Rav4 2013 with Dasaita Max10? Internal and external mics from Dasaita are noisy and voice q is bad most of the time Thank you
How it is solved? could you go higher then -6db when reversing in Vivid 11?
Are Dasaita developers reading these threads? or somone has to communicate the issues? If they haven't fixed this Bluetooth bug by now I would assume they are not getting the memo.
buongiorno scusate anche io ho preblemi con ZLINK noi abbiamo solo android auto ma non va' resta sempre in collegamento vorrei aggiornare all'ultima versione , forse con questa versione risolvo??? ...
After installing PX6 in 2014 Highlander Liftgate will not operate. Any Ideas?
I have a new Max 11 installed in my 2017 RAV4. I have a Atoto HD USB DVR I would like to install. It appears Position C 6 pin plug socket in the back of unit is where it should go but I cannot find...
I bought a Dasaita PX6 Vivid 11 several weeks ago, It came in yesterday, I followed the instructions and watched a few videos, after some confusion with the plugs and figuring out the issue was act...
Oh! Sorry, I was expecting to get a notice when a reply came in. I currently have FSC-BW124 selected but have tried a lot of the different options like WQ- RF210 but haven't had succes...
@Ed Vard probably you purchased a non carplay/android auto. With that information is very difficult. Your unit seems to be from 2021 .... So you never tried to use carplay in these 2 years? Check ...
@Kevin Phillips you are wrong. I am just a user like you..I am having mrcd units since long time ago and I was an active member on XDA forums as well. I want the system be working well and I read/...
@Kevin Phillips you should be able....but not all dongles are supported as all the drivers are not included into the system
@Kelan Moser go to android settings and on the time zone decativate automatic zone and manually set your region time zone
@Austin Swartz ir coudl be s simple freeze of the software..... Reboot completely the unit by means of disconnecting the car fuse for the radio and connect back after 30secs....check if the radio d...
@Carlos Fernandes thanks. It is strange ..your canbus must be selected as some Toyota option from "Simple" manufacturer. Check your cables.are well connected between unit and canbus
@Jaime Sánchez I have the lastest scout ROM installed and same 3.78 MCU version . I have a Samsung S10 plus (UI 4.1 as well) and I experienced just twice the no connecting issue (just manual...
@Jeremy Brown which version of software do you have installed? Can you upgrade to the latest PX6 A10.rom available? Remember to wipe data (enable the check when promoting for a detected upda...
My back up camera is opposited/ mirriored. Anyone know the FIX ? Tire pressure not showing up either?
