@Iker Gomez ok sounds good and thanks for getting back to me. Although, I do recall the head unit showing 11 during startup. I think they sent me MAX11 and I flashed VIVID10, similar issue as @Jord...

@Brandon Shiers Canbus box is the device that could trigger the camera while in reverse, so it is crucial that you st up correctly the canbus. As i could see in some photos on Amazaon for the CB00...

@Mike Dawoud  you have to enter into recovery menu and there force the last Vivid 10 OTA upgrade Prss the RESET pinhole with a toothpick or similar and leave pressed until you see the recove...

@James Noles  1)If your unit has an integrated amplififer...you must check that you received a Canbus Box 2) Configure correctly the canbus on Factory Settings  (password 126)   ...

Dasaita 9” Inch Car Stereo (this product: https://smile.amazon.com/dp/B08Q3HGG7N) Installed per the included instructions and everything is working (wifi etc.) but I am not getting any audio...

Hello,  I am installing my new dasaita android head unit in my 2009 Tch and have the JBL, so I ordered the canbus adaptor (all off amazon)   The canbus harness barcode reads: Model: TY...

@Jorden Peacock I'm experiencing the same issue at the moment, were you able to resolve?

@Iker Gomez it seems you're the rock star on here, any suggestions? :) 

Hello, I recently purchased VIVID10 but that unit was out of stock so they sent me MAX10 and then I could update it to VIVID. I've done the necessary steps but when it reloads it stuck on Subaru l...

The newly released VIVID 11 version works well.  No issue found yet since updated. Thanks.

grazie provo

Aggiorna all'ultima versione della pagina firmware.  Poi connettiti ad internet e fai update delle app di Playstore. A me ora funziona tutto. 

Buongiorno, scusate il disturbo ho un dasaita px6 max10 , collegato regolarmente sia via bluetooth che con hotspot per internet ho scaricato diverse app da playstore e non si avviano mi scrive ar...

@Iker Gomez i have a 2017 Honda Civic FC.  i think the adapter ??? was not included???  

Most things went well with my install.  A few questions though:   1). What setting to I need to set the CANBUS to?  I used the CB005-1 Harness.  Steering wheel is working, and...

@Iker Gomez yes sir that was it.  I had to change it to 1234 and I'm up and running!  I think I'm having a couple of other issues so I'm going to be opening another thread for those....

Thanks for answering Iker. I have configurated BT WQ_RF210. My phone is Samsung A51 5G with Android 12 (One UI 4.1)  

@chee meng chue Which Car model do you have. Most of the Cars need an adapter for the antenna amplifier...

@Micha Icke unforttunately the media app is very basic...but you can use ANY of media players available on the play store as alternative..... i recommend PowerAmp (not free) or VLC (free)

@Brandon Shiers First you have to pair the ODB device to the Unit, before using Torque. Check the ODB user manual for the Pairing Code needed (probably 000 or 1234). This code must be setup on your...