@Avi Mahabir try the following... Just get a FAT32 formatted sdcard and copy into it the OTA upgrade (update.zip) onto the root folder of the sdcard but for the android version you had previously ...

Hello guys I have max10 px6 since I bought it every thing works great, except wireless android auto, I have tried everything but it didn't make any difference, I have zlink support car play wired a...

Hello I bought this unit from Dasaita, see pictures for the specifications. Its a PX6 Shipped from dasaita with Android 10. I would like to update the Android if available but Im not sure wha...

@chee meng chue which generic headunit? can you share model and installed firmware?

@Manuel g  problems are the same for both issues, the time region... the system is assumed to be in CHina time, so when you are using the unit (assuming Spain time) it is night at China. Plea...

those who used an Android OTA file that didnt correspond with the Android version you had installed....you have corrupted the boot as the boot and recovery partition belongs to an Android version t...

Welcome I also ordered an RCA adapter so that JBL played correctly. Best regards

I,ve got a Rav4 with original JBL unit. With Dasaita There is a background annoying sound even when there's no music or sound. I've read it's because of the amp, that I'd have to use a different ha...

I,ve got an W11 version 2gb + 32gb with original factory firmware (July 21]   I,ve got a couple of issues I cant get rid of. I cant change time zone. Its stuck on China no matter if I try t...

@Avi Mahabir that's exactly what I did. Used ota file for 10 instead of img file on my 11 and now it's in infinite boot loop. Says "android 10" when it boots then stays on Toyota logo and neve...

@Iker Gomez I had Android 10 (Vivid 10) and I attempted to upgrade to Android 11 (Vivid 11) using a flash drive. 

@Jorden Peacock This is exactly what I did also except I tried installing Vivid 11 on Vivid 10. I used a flash drive since the files that I could find was ZIP instead of IMG. After installing the A...

@Iker Gomez do you have the img download for 11? Rk3399. I just went and bought an sd card and USB adapter so I can put those tools and the img file on there and hopefully fix it like you said...

@Iker Gomez it's impossible for me to get into recovery mode. No matter how many times I try it. I hold RST down and the buttons flash then it just restarts the boot loop. If I hold it longer ...

@Iker Gomez  I think what I did is I tried to turn a max11 into vivid 10 so it bricked it. I thought they sent me a max 10 but on the box it says max11. I'm struggling to get those tools to do...

Iker,  Check this out. https://imgur.com/a/aXhW32J The video wiring appears to be incorrect on the harness according to my diagram from Honda. Let me know your thoughts.

Thanks for the reply Iker! Here is a photo of the CANBUS that was supplied. https://imgur.com/MwP71hY The Honda HRV is listed under the CRIDER catagory in the factory settings and all the info I...

@Jorden Peacock are you sure you did not use a vivid11 OTA? You case seems to be a classic boot loop due to software corrupted when trying to upgrade from Android version. To other by means of usin...

@John Rasmussen i don't think so. Software is pretty the same. First check which canbus do you have. Take a picture of the canbus adhesive. Depending on the canbus manufacturer you will fin...

@Jorden Peacock did you check the procedure for going into recovery that I published? This is the first thing to do....get into the recovery menu.....(if recovery not corrupted)