Hello,
I have the following on a Toyota, is there any chance (an update?) to have Android Auto on it? I guess it should have zlink, it has easyconnect only.
thanks and regards,
Fabrizio
Hello,
I have the following on a Toyota, is there any chance (an update?) to have Android Auto on it? I guess it should have zlink, it has easyconnect only.
thanks and regards,
Fabrizio
@Fabrizio Dalfa
Hello.
We'd like to remind that the update operation involves the potential risks.
For this reason, we suggest that you can keep the current version to use if the unit can work normally.
Besides, some Android10 items cannot support Zlink(CarPlay/Android Auto) function.
For further verification, please go Settings > Car > Factory settings (password :126) > App > CarPlay > Zlink > Apply > Exit > Reboot,
and check if you can use Zlink App.
If not, then your unit is not equipped with this function.
Hello,
No, I haven't :|
regards,
Fabrizio
Hello.
Please try to update the System and MTCH.
-----------------------------------
System-20230302:
https://www.dropbox.com/s/5w50x3fqkvhiv3f/ha3_rk3399_10.0_ota%2820230302%2B%E8%93%9D%E7%89%99MCU%29.zip?dl=0
MTCH3.89a:
https://www.dropbox.com/s/fa2doaskmozjbkq/MTCH_HA_V3.89a.zip?dl=0
Tips:
Step1.
Please download above update files via your computer/laptop firstly,
then use the WinZip application to unzip the files.
Step2.
Please format the USB drive to FAT32 Format.
Step3.
Please copy the file “update.zip”&“hmcu.img” to the root directory of USB drive.
Step4.
Please insert USB drive into the unit via USB cable.
Step5.
Please go Settings > System > System updates/MCU updates to start the update.
Reference operation video:
https://www.dropbox.com/scl/fi/szoeofthcmha1unhas6eh/Video-update-MCU.mp4?rlkey=vq742ltn5o6z4vidofrvdawlo&dl=0
@Fabrizio Dalfa
Your MCU seems too old to me, but your PX6 unit seems supported the last update on android 10
I should try the update, if i was you. (it still at your own risk like always with this chinese things.
Note that the reference of your Bluetooth modul is WQRF210, because the update can change thios parameter.
Once the updadate was finish, make the Dasaita support recommandation above to connect Zlink, and Disconnect Easy connection from the factory settings.
Hello,
I should try the update, if i was you. (it still at your own risk like always with this chinese things.
Is there any way to recover a bricked one?
About the MCU, does MTCH3.89a works fine on a MTCE?
thanks and regards,
Fabrizio
Your photo was small, and it looks like to me, a H.
In fact, your are right if your headunit is MTCE_HA you'll must update on the MTCE_HA
I'm looking if i could send you a file to update
I've found this version, probably not the last, but most recently than the V3_45.1
@Fabrizio Dalfa
Hello.
As we mentioned earlier, some Android10 items cannot support CarPlay/Android Auto function since it hasn't Zlink chip.
If you unable to enable Zlink App via Factory settings, then it most likely the unit that you purchased is not equipped Zlink function.
In this case, it cannot to use it even though you try to to the update.
About the update, we don't recommend to do it because this operation involves the potential risks.
Is MFi mandatory for Android Auto too? What a pity.
thanks
Fabrizio
