Posts made by Richard Smith

• Vivid11 - Radio signal after auto-sleep

  Just wanted to come back to this thread after a few months. I still get the radio input not coming back after waking from auto-sleep, but I found a workaround. If I cycle the unit with the Power On...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  1/1/24, 9:08 PM
• Vivid11 - Radio signal after auto-sleep

  I've had good stability with 4.04 and 20230703 so far. I'll try 20230728 next. Thanks.

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  8/14/23, 6:25 PM
• Vivid11 - Radio signal after auto-sleep

  @Support Dasaita It's an issue that gets raised on XDA Developers, because some cars will allow current drain with ACC OFF and others will not. In my case (Toyota RAV4 Hybrid) the issue gets ...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  7/31/23, 8:19 PM
• Vivid11 - Radio signal after auto-sleep

  @Support Dasaita I was able to apply the update with no issues. It will take several days of use to see if the issue returns. I still stand by what I said earlier, it would be useful to set the tim...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  7/30/23, 9:11 PM
• Vivid11 - Radio signal after auto-sleep

  @Support Dasaita I decided it was easier to set auto-sleep to 1 hour and allow it to reboot. I am happy to test 4.04 but if you want me to test 20230708 I would rather have it in the update.zip for...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  7/29/23, 6:41 PM
• Vivid11 - Radio signal after auto-sleep

  @Support Dasaita Is this new version higher than 4.01? For me 4.01 has been solid.

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  7/28/23, 6:43 AM
• Vivid11 - Radio signal after auto-sleep

  Just a quick update, the issue with the radio app frezzing up still happens, and there are some threads on XDA Developers about it. Some apps seem to get frozen in memory or have their permissions ...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  5/5/23, 1:29 AM
• Vivid11 - Radio signal after auto-sleep

  @Guillem Martínez Really sorry that happened. You're saying you can't even get to the recovery menu? I'm talking about the procedure described here: https://youtu.be/3P7nuevmJmM Please prov...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  5/4/23, 11:08 PM
• How do you change the general audio?

  I had success by setting radio all the way down to 1 and then adjusting the "Amp volume" in the "other" menu until it was OK. It's also useful to download an app (on your phone) to make sure you ar...

  posted in Settings/Factory Settings Associated issues

  RS

  Richard Smith
  4/18/23, 3:44 AM
• Vivid11 - Radio signal after auto-sleep

  I can verify that the upgrade worked. It didn't brick me and it didn't force me to wipe the device and reinstall everything. A few things are different, the biggest thing is you get Zlink5 which sp...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  4/15/23, 7:36 PM
• Vivid11 - Radio signal after auto-sleep

  Thanks. In the youtube video you posted, it looks like I can put the update.zip and the hmcu.img on the thumb drive and they will update at the same time when I select System update. Is this still ...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  4/14/23, 3:50 PM
• Vivid11 - Radio signal after auto-sleep

  Thanks for the reply. You are saying that, for the MTCH MCU firmware, that V3.80 is a later (more recent) version then v3.89a? Am I understanding you correctly?

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  4/14/23, 4:23 AM
• Vivid11 - Radio signal after auto-sleep

  Has anyone else seen this issue? I have my unit set to auto-sleep, but when it comes up after turning on the ignition, the radio app does not recieve signal from the antenna. If I do another sleep/...

  posted in Vehicle-Specific Wiring

  RS

  Richard Smith
  4/13/23, 5:56 PM