@Support Dasaita 1 - Thank you for screen calibration, i didn't understand the process, then now it's ok. 2 - I copied the CANBUS.UPDE (size: 85.3ko) on a usb key and when i tried to open f...
@Support Dasaita 1 - Thank you for screen calibration, i didn't understand the process, then now it's ok. 2 - I copied the CANBUS.UPDE (size: 85.3ko) on a usb key and when i tried to open f...
@Steve Hello.Thanks for your message. Please check the firmware update tutorial below then give it a shot.--------------------------------Update File: System Firmware-Vivid10:https://...
@Olivier Alirol Hello.Thanks for your message. In order to help you better, please provide the following information:1.Order Number & Purchase Date.2.Pictures: Settings > About Machi...
@Kevin Bryant Hello. For further confirmation, please provide us with your current Build Number & MCU version pictures. Besides, please carefully check the wiring connection, especia...
@Jean-Claude JACQUET You are welcome :)If you have any other questions or need further support, please don't hesitate to let me know.Wish you a pleasant life.
@Fabien Cerkownik Hello.Good day! 1、Regarding to touch buttons issue, we suggest that you can try to do the screen calibration:Settings > Car > Factory settings (password :126) > K...
A few things I am having PX6 issues with. Apple Carplay often stutters and skips when I am playing music through Apple Music. Also the mic is muffled on phone calls and often time people say I soun...
@Support Dasaita Hi and thank you for your quick support. My bad for the canbus, i thought it was used only for CB047, then i took the canbus to connect with the CB004-3. Now, rear cam and...
Hi I have a Dasaita Android 12 Car Stereo for Nissan X-Trail Qashqai Rogue 2014-2018 Wireless Carplay & Android Auto Car Radio | Qualcomm 665 | 10.2" QLED Screen | Wifi+4G LTE | 6G+64G| Build i...
I installed the update and it did not correct the problem.
@Support Dasaita Ok, thank a lot for your Quick answer. I reinstalled my PX6 but it seem me that is the same firmware. I will test during several weeks and after I will post a message with the resu...
@Mark Mark Hello.Thanks for your message. Please confirm the setting firstly:1.Settings > Car > factory setting (password :126) > Other > Reverse Detection > Enable.2.Setting...
@Mark Mark Hello.Thanks for your message. Please confirm the setting firstly:1.Settings > Car > factory setting (password :126) > Other > Reverse Detection > Enable.2.Setting...
@Kenneth Ward Hello.Thanks for getting back to us.Glad to hear that it is much improved after the update.About the equilizer setting, we will report your idea to our technical department.We ...
@Fabien Cerkownik Hello.Thanks for your response. 1、Please confirm that you have connected SWC cable and CanBus box well. And please try to reprogram the steering wheel controls buttons ...
@Eric Guerrettaz Hello.Thanks for your message. Please check the update tutorial below then give it a shot.---------------------------------------Update File: System Firmware-G1...
@Perry Franklin Hello.Thanks for your response.Please check the update tutorial below and give it a shot.---------------------------------Update File: System Firmware-Vivid11-4-2...
@Joseph Ernest Hello. Please check the firmware update tutorial below then give it a shot.-----------------------------------------------------------Update File: System Firmware-Vivid...
@Joseph Ernest Hello. Please check the firmware update tutorial below then give it a shot.-----------------------------------------------------------Update File: System Firmware-Vivid...
@Antonio Jesús Cabeza Castaño Hello. We have sent you the latest firmware in this post: https://www.dasaita.com/community/forum/topic/153781/what-is-the-latest-version-of-mcu-...
