@Support Dasaita Yes, I saw this menu, I also tried to put value 2 on the radio, I pressed apply and exit the tablet restarts but it shows no signs of change, everything remains as before whatever ...

@Iker Gomez Bluetooth is a techonology to connect the headunit and your phone. If you use carplay or bluetooth to play music, the signal will be transmitted by bluetooth. If you use USB, the signal...

@Mario Racioppi Please follow the steps to make volume adjustment. Settings-Car-Factory settings-enter "126"-Voice 

@rene lopez Please adjust the "Voice" to check if the volume can be lowered. If still no luck, please let us know or you can send us a video to our customer service email-address to show the proble...

@Iker Gomez  thanks for you answer but for example I turn on the car it connect and everything runs ok volume 5,6,7 all good but suddenly goes down and I need to put the volume at 20 .. someti...

@Support Dasaita  thanks for your answers but in the menu  factory setting I don't see the bt volume also if I press the volume tab it just adjust the volume regular .. 

How do you change the general audio on Dasaita PX6 Vivid11? In particular, the audio of the radio already at 3 4 value is quite loud compared to other apps like Google Maps (already set to maximum...

@Telenav Scout  Even after downgrading to Scout 1.1.1543 HCT and trying to upgrade again to version 2.3.4257 but after install it still shows v3.3.10 and still crashes.

Sorry if I'm annoying again. But how do I get the Dasaita into ADB mode?The device is stuck in the start screen when starting and the recovery mode cannot be activated. I have connected the PC to t...

Got it... i was completely wrong. Bluwtooth is only used for discovery and reconnection, but essentially Audio and Video goes by the same USB or WIFI

@Mario Racioppi Specifc brand boot logos are no loger supplied, as they were not compliant with the copyright laws... Search on the forum and you will some logos "very similar" to the ones that or...

Thanks @David Quon, email received and we're working on it. All: While we are investigating the issue, we have temporarily deactivated the update to v3.3.10. If you are affected by the crashes, ...

I have a Dasaita 9' on Toyota C-HR.How do I change the startup logo on the Dasaita? If you want to download them where can I find them? or what resolution should they have?While the animated logos...

@Joshua Thomas @Jason Vollmer Sorry for the inconvenience. In this case, please try the following steps. 1.Try to update the android auto app in your phone and retry to connect wireless android au...

@Grzegorz Urbanski Please let us know if you have try the wired carplay to check if there is something wrong with the zlink? Here is the instruction. 1. Prepare your phone USB cable, and make sure...

@rene lopez  Please let us know if the volume can be adjusted by: CAR settings - Factory settings (Passw:126) and on the Volume Tab raise the BT Volume In terms of the wired carplay connectio...

@William Broach  Sorry to know that the item you order can not meet your expectation. We have reply you via email and may need your assistance. Please just contact with us there. Your cooperat...

@Iker Gomez USB cable plays the role of bluetooth while the phone is wired. We have 2 ways to connect the carplay and here is the wired one. 1)Prepare your phone USB cable, and make sure it is ori...

@Iker Gomez Thanks for the answer. I'll try my luck with the flash tool tomorrow. the recovery mode cannot be activated.

@fab Bond as I remember there is a setting under vivid settings for such behavior. You can avoid to go to main screen with that setting. Look for it