No bad connection or any upgrade. Have been working fine for couple of years, and out of no where colors came like that, freeze and now stop completely working.  Sad part is that is not a chea...

@Robert Fleury my harness is good and my unit works in both acc and Ignition.

@Iker Gomez Please check if your harness has ACC signal, if not, connect theCable ACC from unit to car ACC power manually my connector including the wires from 1 to 20 is well connected and it stil...

@Robert Fleury try to increase volume while assistant is speeching.

The MCU upgrade file is just a few kb. The android software upgrade is close to 1GB    

@Robert Fleury all units have a connector to a external microphone. Check your instruction manual.... On previous px6 units...there is a jack on the chassis of the unit  On newer units one o...

Hello Why when I ask for something on the Google voice command on my car radio when it answers me the volume level is lower than the sound set on the radio and not the equivalent if there is a sol...

@Tony Ye Yes, that setting is on.  But even if I turn that setting off, if I turn the car off and turn it back on some minutes/hours later the radio still thinks Bluetooth is still connected t...

@Iker Gomez It's the internal one that doesn't work I don't have a connector on the back of the radio to connect an external microphone

@Iker Gomez - thx for advice. Do You sure about that file? It has 213kB only, i've checked few versions. 

@Iker Gomez THANKS.  NOT VOICE SELECTION CAN ANNOUNCE STREET NAME.

@gray corgi Did you enable the " Auto Connect" in the Bluetooth settings?

Hi everyone, I have installed the dasaita PX6 (Android 10 , build 3k3399, MTCE_HA_V3.78_4), in these days on my Peugeot 2008 (year 2015) , and everything works fine, also the rear sensors. But I h...

@Robert Fleury be warned that Dasiata will completely ignore you if you request a refund. Much better to do a chargeback via your credit card company.

@Daniele Reali si può fare, che macchina hai? il dasaita è un PX6?

Buongiorno. Ho un Dasaita MAX10 . Posso aggoirnare direttamente, scaricando il vostro fle ufficiale, alla versione MAX11 oppure alla versione VIVID11?

.

The instructions are the same as per this thread: https://www.dasaita.com/community/forum/topic/62118/image-update-android-10-to-android-11?   But instead of using a full Android image for ...

@chee meng chue did they ever worked. Did they started to not working after some MCU upgrade ? 

@Maciej Gołębiewski go to firmware section of this forum and download the latest MTCE MCU upgrade .... Uncompress it to a USB root folder and boot again...it will find it automatically and will upg...