@Pat Ti how many pins is the current smusb cable you have? If it is 10 pin too then I can share with you the schematic to add the female jack to that cable

What kind of phone are you using for sharing internet? An iphone?

@Jerry Wilhite so...it worked before and not now? Which software version do you have? Did you try to upgrade with the latest versions available?

@luca ricciarelli would you mind to explain about the solution? This forum is the way for other people with similar issue could solve it

If everything is correctly installed then check an option onto the factory settings >others (password 126) to enable reverse camera

Follow the same instructions for going from A10 to A11 published by dasaita....but using a full android 10 image instead (you cant use any ota file as the ota files don't contain the recovery parti...

@Cy Rosenbalm i don't understand. Did you finally be able to restore system from the recovery menu....it is just to put an ota update.zip on a USB drive and select the update system from.usb option

Is MTCH 3.80 an upgrade to MTCE 3.78?

To whom it may concvern, Vivid 10 px6 android 10 stuck on boot startup/logo/loop. Quick run down I tried updating the firmware and mcu due to issues I was having prior. Now my headunit is stuck in...

Swap the two yellow camera connectors.

Hey @Iker Gomez  I have just tested this in the new release but it's still giving the same error. Thank you.

@Gaby Rouss I could recover my Device with help of this XDA-Thread:  https://forum.xda-developers.com/t/mtcd-e-android-10-upgrade-using-official-free-tools.4123933/ microSD-Card-Method....

So far I am only able to upgrade MTCE MCU from version MTCE_HA_V3.30_1 to V3.78 Every of my attempt to update to Android 10 end up being abort. Maybe it's not the right file or there is ...

@Michael Sahin Same thing happened for me when I installed the unit on my Camry. Please check the camera video cable label, you must forget to connect those two camera cable together. 

@Dasaita Official @Dasaita team @Quick Yuan still waiting.................   Dasaita sucks :(

I have installed Dasaita Vivid10 (SKU: HA5632-Vivid10-CP-HD) on 2014 Toyota RAV4 LE. Audio, GPS, navigation, Bluetooth, phone dialer, android auto seem to work OK so far. However, when I put car in...

@Ed Vard You need connect to internet to activate it. 

@Quick Yuan hello  can you explain what you did step by stepi tried instructions provided by the thread you mentioned with no success  I have max 11 I accidentally installed max10 ...

hello I faced a similar problem  I thought I bought max 10 So I downloaded the latest max 10 Firmware  but the device does not boot anymore. I'm stuck with logo bootloop To make th...

Good afternoon.  I have a Dasaita Px6 Android 10 for my Toyota CHR. In the update my app from the Play Store has begun me to stop working as some App Waze, Disney Crome etc. The App WEBVIEW...