The power wire on my back up camera is GREEN (wire 2). It is shown in the photo before placed into the wire labeled "Back". I've attached photos of your wiring harness. There is no red wire.
The power wire on my back up camera is GREEN (wire 2). It is shown in the photo before placed into the wire labeled "Back". I've attached photos of your wiring harness. There is no red wire.
Hello I bought this: Dasaita Vivid11 Toyota Corolla 2014 2015 2016 LHD Car Stereo 10 Inch Carplay Android Auto PX6 4G+64G Android11 1280*720 DSP Just a month ago, i had this problem: https...
They have this cable. For connection to radio. There is no connector for this cable on the radio. Can it be connected differently? Thank you.
@Support Dasaita The pins in the plug 2 are intact. The plug is clean without dust. I've also reconnected it firmly. After reconnection, the static noise became a little bit lower but is sti...
@Support Dasaita I have double checked the connection of "Cam in" and "to Cam" cables. They are well connected as shown in the 1st photo. The IC cables (black, red and white) are well connec...
I ordered on amazon 112-5159076-4487424 I wanted to switch to max11, which I did and everything was good. But then I though I maybe needed to also install HCT Firmware PX6 Android 11, w...
@Александр Максименко Hi there, we have camvin cable, you can just inquire the shopkeeper of the review 360 and confirm which one to purchase.
@PAUL JONES Please follow the instruction to have a "Wheelkey Study". Step 1. Please go Settings > Car > Factory settings (password：126) > Others > Steering wheel keys assign > Can ...
@Kegan Stack Hey, the wire is not named reverse, it is a red cable, we have attached another cable to you. Please kindly wire the harnesses according to the photo below, pay attention to the red wo...
@Michael Goettl Please kindly send us your order number so that we can better assist you. In the meanwhile, please let us know that built number and MCU on "about machine" is shotted after updating...
I have the same issue in my 2012 Camry. The dasaita px6 Max10 updated to Vivid 10 is installed. My steering wheel keys worked flawlessly until recently. Now they either do not respond or some keys ...
@jogobelo r The version that we sent you is telenav_vivid_rk3399_11.0_ota(20230525). According to the photo that you attached, the current version of your unit is 20221129 not telenav_vivid_rk3399_...
Well, Im that guy. Tried a different USB and it worked. However, I have two instances of vivid running, is this correct? and in the second screen I am not sure what this icon is, it doesn't o...
Hey all, I have a head unit for my 2016 camry. I believe it was this one. https://www.dasaita.com/products/dasaita-vivid10-toyota-camry-2015-2016-2017-car-stereo-10-2-inch-carplay-android-auto-px6-...
I don't see a reverse cable in my head unit. Only a "back" wire, this is connected to the camera trigger power wire. To be clear, I can view the camera image when in reverse, however, I have to fum...
Hello, the version I tried was telenav_vivid_rk3399_11.0_ota(20230107), what is changed in this one, what did you send?
@Support Dasaita Thanks.
@Max Auer AHD is clearer than Analog. We will inform you when G12 launch and you can also find information in our forum.
