Hi,
I have a Dasaita for my Nissan Qashqai (2018)
Yesterday I've downloaded your update firmware.
When I tried to update the car battery turn off. 😒
The radio is trying to start up and does not go past the initial logo. It's a looped logo...
I try to push Reset buttons (15s..), lights no blink for enter into Recovery Mode
I can't get into REcovery Mode. Can someone tell me how to do it?
Thks!!
M.
Obviously it is a software issue produced by the abnormal interruption of the upgrade process. You have to reflash the system again.
If the reset button do not get into the recovery system...There are other alternative procedures to get into the recovery system or reflash.
(Bootable sdcard, manual flashing by means of special own made cable, modinstaller paid up apk)
As these a non standard procedure and not recommended by dasaita (these procedures are for taking your own risk)....you will not find the information in this forum.
With the clues given above...do specific searches over the internet
But first try to remove the radio fuse for a minute and connect again...then try the reset button gaona for 15sec.....until you see the recovery menu
The options on the post before are when recovery partition is damaged
